Table of Contents
Advertisement
The machine will automatically reset the ink dot counter.
•
If you replaced an ink cartridge, for example, the Black cartridge, the LCD may ask you to verify that it is
a brand new one (for example, [Did you change Black]). For each new cartridge you installed,
select [Yes] to reset the ink dot counter for that color. If the ink cartridge you installed is not a brand
new one, be sure to select [No].
•
If the LCD displays [No Ink Cartridge] or [Cannot Detect] after you install the ink cartridge,
check that the ink cartridge is installed correctly. Remove the ink cartridge and reinstall it slowly until it
locks into place.
IMPORTANT
•
DO NOT take out ink cartridges if you do not need to replace them; the machine will not know the
quantity of ink left in the cartridge.
•
DO NOT touch the cartridge insertion slots; the ink may stain your skin.
•
If you mix the colors by installing an ink cartridge in the wrong position, the LCD shows [Wrong Ink
Color].
Check which ink cartridges are not matched by color to their ink cartridge positions and move them to
their proper positions.
•
When you open an ink cartridge, install it in the machine and use it up within six months of installation.
Use unopened ink cartridges by the expiration date written on the cartridge package.
•
DO NOT dismantle or tamper with the ink cartridge; this can cause the ink to leak out of the cartridge.
Related Information
•
Routine Maintenance
•
Error and Maintenance Messages
•
Paper Handling and Printing Problems
•
Pack and Ship Your Brother Machine
470
Advertisement
Table of Contents
