Protecting The Environment - Black & Decker GPC1820L Manual

ENGLISH
♦ The storage temperature must always remain in the range
of +10°C to +40°C. Place the battery on a level surface.
♦ Before using the tool after prolonged storage, fully charge
the battery again.

Protecting the environment

Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do
not dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at
the address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com.
Batteries
At the end of their useful life, discard batteries
with due care for our environment:
♦ Do not short-circuit the battery terminals.
♦ Do not dispose of the battery(s) in a fire as this may result
in a risk of personal injury or an explosion.
♦ Run the battery down completely, then remove it from
the tool.
♦ Batteries are recyclable. Place the battery(s) in a suitable
packaging to ensure that the terminals cannot be short-
circuited. Take them to any authorised repair agent or a
local recycling station.
10
(Original instructions)
Technical data
Input voltage
No-load chain speed
Max cutting length
Weight
Battery
Voltage
Capacity
Type
Charger
Input voltage
Output voltage
Output current
Level of sound pressure according to EN ISO 11680-1:
Sound pressure (L ) 78 dB(A), uncertainty (K) 3 dB(A)
pA
Level of sound power according to EN ISO 3744:
Sound power (L ) 98 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum)
according to EN 60745:
Cutting freshly felled softwood (a
Uncertainty (K) 1.5 m/s
GPC1820L H1
Vdc 18
min 114
-1
cm 17
kg 3.5
BL1518
Vdc 18
Ah 1.5
Li-Ion
905531** TYPE 1
Vac 230
Vdc 20.5
mA 200
) = <2.5 m/s
2
h,w
2