Black & Decker GL420 User Manual

Hide thumbs Also See for GL420:

Advertisement

GL420
GL423
GL425
GL430
1

Advertisement

Table of Contents
loading

Summary of Contents for Black & Decker GL420

  • Page 1 GL420 GL423 GL425 GL430...
  • Page 2 Copyright Black & Decker...
  • Page 4 18 17 20º...
  • Page 5: Intended Use

    CONGRATULATIONS! INTENDED USE You have chosen a Black & Decker tool. Our aim is Your Black & Decker strimmer GL420/GL423/GL425/ to provide quality tools at an affordable price. GL430 families has been designed for trimming We hope that you will enjoy using this tool for lawn edges and to cut grass in confined spaces.
  • Page 6 E N G L I S H Work area When not in use, the appliance should be Do not expose the appliance to rain. Do not stored in a dry place. Children should not have use the appliance in damp or wet conditions. access to stored appliances.
  • Page 7: Electrical Safety

    E N G L I S H This appliance is double insulated in Switch off, remove the plug from the accordance with EN 60335; therefore no socket and ensure that moving parts have earth wire is required. stopped rotating before leaving the appliance unattended and before Prevent body contact with earthed or changing, cleaning or inspecting any parts...
  • Page 8: Carton Contents

    E N G L I S H Never use the tool unless the guard is Never use a light socket. properly fitted. Using an extension cable Releasing the cutting line (fig. A) Always use an approved extension cable suitable In transit, the cutting line is taped to the spool for the power input of this appliance (see rating housing.
  • Page 9: Maintenance

    E N G L I S H If the tool starts running slowly, reduce the load. Winding new line onto an empty spool (fig. E) In order to achieve optimum cutting results, You may wind new cutting line onto an empty only cut dry grass.
  • Page 10: Protecting The Environment

    E N G L I S H Tool runs slowly You can check the location of your nearest Check that the spool housing can rotate freely. authorised repair agent by contacting your local Carefully clean it if necessary. Black & Decker office at the address indicated in Check that the cutting line does not protrude this manual.
  • Page 11 E N G L I S H OTHER OUTDOOR TOOLS Black & Decker has a full range of outdoor power tools that make life in the garden easy. If you would like further information on the following products, please contact our Service and Information Centre (see the address page towards the end of this manual) or your local Black &...
  • Page 12 TYP. GL20S GL20SC GL225/225S/225SC/225C GL420/GL423/GL425/425S/425SC E13003 www.2helpU.com 17 - 07 - 2003...
  • Page 13 TYP. E13002 www.2helpU.com 24 - 07 - 2000...
  • Page 14 574792-22 07/03...
  • Page 16 Australia WALT Industrial Power Tool Company Tel. 03 9895 9200 7 Clarice Road Fax 03 9899 7465 Box Hill, Victoria 3128 New Zealand Black & Decker Tel. 09 579 7600 81 Hugo Johnston Drive Fax 09 579 8200 Penrose, Auckland, New Zealand United Kingdom Black &...

This manual is also suitable for:

Gl423Gl425Gl430Gl425sc

Table of Contents