Related Manuals for Binary B-500-MTRX-230-8x16
Summary of Contents for Binary B-500-MTRX-230-8x16
- Page 1 HDMI MATRIX SWITCHER B-500-MTRX-230-8x16 B-500-MTRX-230-16x16 INSTALLATION MANUAL Source | M (HDMI Ou...
- Page 2 IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire or electric shock, read and follow all instructions and warnings in this manual. Keep this manual for future reference. 1. Do not expose this apparatus to rain or moisture. Do not expose this equipment to dripping or splashing, and ensure that no objects filled with liquids, such as vases, are placed on the equipment.
-
Page 3: Table Of Contents
CONTENTS Product Overview .................................................... 4 Features ......................................................4 Package Contents ....................................................4 Recommended for Installation ..............................................5 Device Layout ...................................................... 5 5.1. Front Panel of the B-500-MTRX-230-16x16 Switcher ................................... 5 5.2. Rear Panel of the B-500-MTRX-230-8x8 Switcher ....................................6 Installation & Setup ................................................... 7 6.1. -
Page 4: Product Overview
1. PRODUCT OVERVIEW Welcome to Binary™, one of the most highly regarded brands available today. This product is engineered to provide years of exceptional reliability. We appreciate your business and we stand committed to providing our customers with the highest degree of quality and service in the industry. -
Page 5: Recommended For Installation
Binary High Speed HDMI Cables to connect sources to B-500-MTRX-230 HDMI inputs • Binary HDMI cables or B-500-RX-230-IR units and Cat 5e/6 cable installed between matrix switcher location and displays (See section 7.6.3.1, page 12 for HDBaseT wiring recommendations) •... -
Page 6: Rear Panel Of The B-500-Mtrx-230-8X8 Switcher
5.2. Rear Panel of the B-500-MTRX-230-8x8 Switcher UTPUTS IR OUTPUT TO SOURCE IR INPUT LINK LINK LINK LINK LINK LINK LINK LINK TO ROOM IR INPUT TO ROOM 12V DC 16A IR OUTPUT TO SOURCE INPUT LINK LINK LINK LINK LINK LINK LINK... -
Page 7: Installation & Setup
M. RS-232 Control (DB9) Attach connection from control system or Windows PC for serial control of the B-500-MTRX-230. Update firmware on the matrix switcher. N. USB/RS232 Toggle Switch The USB/RS232 firmware update switch is for main board updates. The toggle switch must be set to RS232 for normal operation. -
Page 8: Basic Instructions
Leave an RS-232 connection easily accessible for using the Configuration Utility. The B-500-MTRX-230-8x16 / B-500-MTRX-230-16x16 is equipped with many setup functions that must be accessed by using a PC and the Configuration Utility. Leave an RS-232 cable connected during setup and testing that can easily be connected to the PC. -
Page 9: Switcher Location And Placement
CAUTION: Do not use the matrix switcher as a shelf for other equipment in the rack. 6.6. HDMI Input Connections Each of the 8 or 16 inputs on the B-500-MTRX-230-8X16/16X16 utilizes a standard HDMI port for connection. Follow these guidelines when connecting sources to the inputs •... -
Page 10: Output Connections
6.7. Output Connections The B-500-MTRX-230 matrix switcher is equipped with one HDMI and one HDBaseT output port for each of the 16 output zones. See the sections below for specific instructions and details for each connection type. Note: Any input selected on an output zone is played on both the HDMI and HDBaseT outputs for that zone simultaneously. -
Page 11: Installation Instructions
Note: For IR Passthrough integration, see section 6.17. IR Passthrough Installation and Setup, page 12. 6.13. Matrix Control Connections All drivers, associated software and extra documentation is available under the Support tab on the B-500-MTRX-230-8x16 / B-500-MTRX-230-16x16 product page. Matrix IR Control Input FIGURE 4: System IR 6.14. -
Page 12: Rs-232 Control
FIGURE 5: RS-232 (DB9) Pin Configurations 6.16. Ethernet/IP Control The B-500-MTRX-230-8x16 / B-500-MTRX-230-16x16 includes an Ethernet port that can be used to control the device using Telnet Protocol. This port follows TIA 568 A/B standards; please refer to these standards when terminating cables. -
Page 13: Matrix Switcher Ir Connections
IR Input to Room port 1 will send signals to HDBaseT Output 1. 6.19. Matrix Switcher IR Port Configuration All IR connection ports on the B-500-MTRX-230-8x16 / B-500-MTRX-230-16x16 are 3.5mm mono and use this pinout configuration. -
Page 14: B-500-Rx-230-Ir Ir Connections
6.20. B-500-RX-230-IR IR Connections The B-500-RX-230-IR IR ports are described below. Use the diagram for reference. FIGURE 7: A. IR Flasher–IR output to connect to IR Flasher B. IR Receiver–IR input to connect to IR Receiver or to output of a control system 6.21. -
Page 15: Ir Flasher
6.25. IR Flasher IR flashers attached to this port will control equipment using commands sent from a control system flasher output into the matrix IR Input to Room ports. GND (Sleeve) IR Signal (Tip) FIGURE 12: 6.26. IR Application Diagrams 3.5mm Mono IR Flasher Ethernet Connection... -
Page 16: Ir Passthrough From Rooms To Sources
6.27. IR Passthrough from Rooms to Sources HDMI Source HDMI Source PLAY IR Flasher IR Flasher HDMI HDMI UTPUTS IR OUTPUT TO SOURCE IR INPUT LINK LINK LINK LINK LINK LINK LINK LINK TO ROOM IR INPUT TO ROOM 12V DC 16A IR OUTPUT TO SOURCE INPUT... -
Page 17: Edid Configuration
7. EDID CONFIGURATION The displays used within an installation usually vary from room to room, and some may not support all resolutions available from a source. It is necessary to make sure sources will provide a video and audio format compatible with all connected displays programmed to use them. -
Page 18: How To Configure Auto Edid
7.4. How to Configure Auto EDID To set up Auto EDID configuration, first make sure that all displays are powered on and connected to the matrix switcher. Then, press the following remote buttons in this order. Be sure to press each button within 10 seconds of the previous button-press to prevent the command from resetting. -
Page 19: How To Set Embedded Edid For A Single Input
7.7. How to Set Embedded EDID for a Single Input Example: Input =1 Embedded EDID=4 Display Readout (Example) 1. Press DEFAULT 04 . . 2. Press Number Key (1-8) to select one Embedded EDID 04 . . 3. -
Page 20: How To Learn Edid To All Inputs
7.11. How to Learn EDID to All Inputs Example: Input=All EDID Learned from Output 4 Display Readout (Example) L._. 1. Press LEARN L._. 2. Press OUTPUT 3. Press Number Key (1-8) to select the Output the EDID is learned from. 04... -
Page 21: Ir Front Panel Ir Enable
9. FIRMWARE UPDATE Binary may occasionally release new firmware for the B-500-MTRX-230 to address new standards and technology. It will never be necessary to perform an update to an existing, correctly functioning system, but during installation or service, it is recommended to check the installed version to be sure it is the newest available. -
Page 22: Operation And Control
10. OPERATION AND CONTROL During setup and testing, use the included IR remote to control the matrix switcher. After setup is complete, a control method should have been setup and programmed as described in Section 6.13. Matrix Control Connections on page 11 for regular operation. 10.1. -
Page 23: Route Inputs To Outputs
10.2. Route Inputs to Outputs Input to Single Output Display Readout (Example) Example: Output=3 Input=4 1. Press OUTPUT 2. Press Number Key (1-8) to select Output 3. Press INPUT 4 4.Press Number Key (1-8) to select Input 4... -
Page 24: Resetting To Factory Defaults
System Layout chart on the page 28 to record a description of each part of the system. If a problem cannot be solved using the methods listed here, fill out the System Layout Chart as completely as possible and contact Binary Tech Support for assistance at 866.838.5052. -
Page 25: No Signal From Source To Any Display
11.2. No Signal from Source to any Display If a source will not send a signal to any connected display, it is probably due to an issue with the cable in use, the EDID setting for the input, or the settings in the source: •... -
Page 26: Field Replaceable Warranty Cards
12. FIELD REPLACEABLE WARRANTY CARDS If an HDMI input, HDMI/HDBaseT output, IR only input or control card is determined to be inoperable please notify Tech Support (section 14). If an input or output card is deemed defective, follow the instructions below. Note: Please review all installation instructions and procedures prior to beginning this process. - Page 27 • Before continuing, have the provided ESD bag labeled “Return” ready to store the defective card. This bag will keep the defective card from being misplaced or confused with the new card. • Using a #2 Phillips screw driver with a magnetic tip, remove the Phillips screw under the upper pull-handle of the card to be replaced.
-
Page 28: System Layout Chart
13. SYSTEM LAYOUT CHART Use this chart to identify the sources and displays attached to the system, and make any notes about each part. When completing the outputs chart, make sure to indicate whether an HDMI cable, B-500-RX-230-IR, or another brand HDBaseT receiver is being used to extend signal to the display, and indicate the approximate length of any cables. - Page 29 Output Source Brand HDMI or Cable Number and Model Location HDBaseT Length Notes...
-
Page 30: Specifications
14. SPECIFICATIONS TECHNICAL B-500-MTRX-230-8x16 B-500-MTRX-230-16x16 HDMI Compliance HDMI 3D HDCP Compliance Video Bandwidth 6.75Gbps Resolution Cat5e/ Cat6 Cat6a 1080i / 720p 24-bit color 200ft 230ft HDMI over UTP Transmission Full HD 1080P 24-bit color 200ft 230ft Full HD 1080P 36-bit deep color... -
Page 31: Warranty
16. WARRANTY 16.1. 2 Year Limited Warranty This Binary product has a 2-Year limited warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products that have been abused, modified or disassembled. - Page 32 16.2. ® Rev: 151130-0840...