Binary B-660-MTRX-8X8 Installation Manual

8x8 hdmi matrix with analog audio outputs and 4k-to-1080p downscalers

Advertisement

Quick Links

8x8 HDMI Matrix with Analog Audio Outputs
and 4K-to-1080P Downscalers
B-660-MTRX-8X8
INSTALLATION
MANUAL
Source | M
(HDMI Ou

Advertisement

Table of Contents
loading

Summary of Contents for Binary B-660-MTRX-8X8

  • Page 1 8x8 HDMI Matrix with Analog Audio Outputs and 4K-to-1080P Downscalers B-660-MTRX-8X8 INSTALLATION MANUAL Source | M (HDMI Ou...
  • Page 2 IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire or electric shock, read and follow all instructions and warnings in this manual. Keep this manual for future reference. 1. Do not expose this apparatus to rain or moisture. Do not expose this equipment to dripping or splashing, and ensure that no objects filled with liquids, such as vases, are placed on the equipment.
  • Page 3 FCC WARNINGS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 4: Table Of Contents

    CONTENTS Product Overview ................................5 Features .....................................5 Package Contents ................................5 Device Layout ..................................6 4.1. B-660-MTRX-8x8 Front Panel........................6 4.2. B-660-MTRX-8x8 Rear Panel ........................6 Installation & Wiring ..............................7 5.1. Installation ................................7 5.2. Wiring ..................................7 RS232 Control ................................8 IR Remote Control ................................9 Web UI Control ................................9 8.1.
  • Page 5: Product Overview

    PRODUCT OVERVIEW B-660-MTRX-8x8 is an 8x8 HDMI 2.0 Matrix with resolutions supported up to 4K@60Hz 4:4:4 8bit and HDCP 2.2 compatibility. It allows eight sources to be switched to eight HDMI displays simultaneously. The B-660-MTRX-8x8 supports various HDR formats including HDR10, HLG and Dolby Vision up to 4K60, and ARC for residential applications.
  • Page 6: Device Layout

    DEVICE LAYOUT 4.1. B-660-MTRX-8x8 Front Panel B-660-MTRX-8x8 1. Output Channel Indicator Indicates input for output port 1-8. 2. IR Window Receives signals from IR remote. 3. STATUS LED On: The device is connected to the network. Off: No network is connected to the device.
  • Page 7: Installation & Wiring

    CEC function is set to on) INSTALLATION & WIRING 5.1. Installation B-660-MTRX-8x8 occupies 1U space and can be placed on a solid and stable surface or installed on a standard equipment rack. Steps to install the matrix on an equipment rack: 1.
  • Page 8: Rs232 Control

    PC or control system to the RS-232 port of the receiver. API command for RS232 control is available in the separate document “API Command Set_ B-660-MTRX-8x8”. A professional RS232 serial interface software (e.g. Serial Assist) may be needed as well.
  • Page 9: Ir Remote Control

    IR REMOTE CONTROL The Matrix can be controlled by the IR Remote provided. Point the Remote directly to the IR window on front panel of the Matrix. Now you can select input source for each output display. Previous Input Next Input Output 2 To select input source for output display: 1.
  • Page 10: Web Ui Introduction

    3. Input the IP address in your browser and press Enter. The following window will display. Enter the Username and Password. The default username and password are both “binary”. Then click “Login”. When login firstly, the following page will be popped up to remind you to change the username and password.
  • Page 11 8.2.1. SIGN OUT Click the icon to return to the login page. 8.2.2. FACTORY DEFAULT Click the icon, the following window will be popped up, click “CONFIRM” to reset the device to factory default. Note: Please wait at least 3 minutes to refresh the web page and log in again. 8.2.3.
  • Page 12 Click “BROWSE” to select the needed upgrade file (“.zip” file is need, you can upload ARM, MCU, or web UI upgrade file), and then click “UPDATE” to upgrade the corresponding firmware. Note: Do not power off the device when upgrading. 8.2.4.
  • Page 13 • All Outputs: Click to route one input to all outputs. • None: None input is routed to the output (or the output is turned off). By default, Video Input 1 routes to Output 1, …, Video Input 7 routes to Output 7, Video Input 8 routes to Output 8.
  • Page 14 2. Configuration This section allows you to change name for each input and output, set EDID for each input, and show video and audio informations for each inputs and outputs. • Input/Output: Select one input/output to set and show its video and audio informations. •...
  • Page 15 For Output: • ExportEDID: Click to save the EDID information of the TV connected to the selected output port as a bin file to local PC. • Video Out/Audio Out: Show the video and audio informations for selected outputs. 3. Display Control •...
  • Page 16 • The return information of the sent command will be shown in log box: 2. Log This section shows the operation log and return information of the tested command. • Export Log: Click to export omni log recording information for remote trouble shooting. 8.2.7.
  • Page 17 • DHCP: When enabled, the IP address of the Matrix is assigned automatically by the DHCP server connected. • Static: When enabled, set up the IP address manually. • Apply: Click to enable the network setting. Note: • When “Static” is selected, please ensure your PC is in the same network segment as the Matrix, i.e.
  • Page 18: Specifications

    b. Login Username This section is where to change the Username. • Apply: Click to make the setting take effect. Note: User name must be 4 to 16 characters in length, alphanumeric only. c. Login Password This section is where to change Password. •...
  • Page 19: Transmission Distance

    10. WARRANTY 2-Year Limited Warranty This Binary product has a 2-Year limited warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products that have been abused, modified or disassembled.
  • Page 20 Rev: 220418-160923 © 2022 Binary...

Table of Contents