Blades; Battery - Husqvarna AUTOMOWER 315 Operator's Manual

8.7 Blades

WARNING
Always use original blades and
screws when replacing. Only
replacing the blades and reusing
the screw can result in a screw
wearing during mowing and
shearing. The blades can then be
propelled from under the body and
cause serious injury.
There are three blades on the robotic lawnmower, which
are screwed into the blade disc. All three blades and
screws must be replaced at the same time to obtain
a balanced cutting system.
Use Husqvarna genuine blades only.
To replace the blades:
1. Set the main switch to position 0.
2. Wear protective gloves.
3. Turn the robotic lawnmower upside down.
4. Rotate the skid plate so that its holes align with
the screw for the blade.
5. Remove three screws. Use a straight slot or
cross-tip screwdriver.
6. Remove the blade and the screw.
7. Screw on the new blade and the new screw.
Check that the blades can pivot freely.

8.8 Battery

The battery is maintenance-free, but has a limited service
life of 2 to 4 years.
Battery service life is dependent on the length of
the season and how many hours a day the robotic
lawnmower is used. A long season or many hours of use
per day means that the battery must be replaced more
regularly.
Contact your dealer to replace the battery.
Only charge the battery in the included charging station.
Incorrect use may result in electric shock, overheating or
leaking of corrosive liquid from the battery. In the event of
leakage of electrolyte flush with water/neutralizing agent,
seek medical help if it comes in contact with the eyes.
IMPORTANT INFORMATION
Do not try to recharge non-rechargeable
batteries.
OM_1157863-26_HQ 310,315,EN_160229.indd 73
MAINTENANCE
3012-1301
3012-272
3012-1207
English - 73
2016-02-29 10:52:38