Transport And Moving; In The Event Of A Thunderstorm - Husqvarna AUTOMOWER 315 Operator's Manual

Chassis
Clean the underside of the chassis. Brush or wipe with
a damp cloth.
Wheels
Clean around the front wheel and rear wheels as well as
the front wheel bracket.
Body
Use a damp, soft sponge or cloth to clean the body. If
the body is very dirty it may be necessary to use a soap
solution or washing-up liquid.
Charging station
Clean the charging station regularly from grass, leaves,
twigs and other objects that may impede docking.

8.5 Transport and moving

Secure the machine during transport. It is important that
the robotic lawnmower does not move when it is being
transported, for instance, between lawns.
The contained lithium-ion-batteries are subject to the
Dangerous Goods Legislation requirements.
For commercial transports e.g. by third parties,
forwarding agents, special requirement on packaging and
labeling must be observed.
For preparation of the item being shipped, consulting an
expert for hazardous material is required. Please also
observe possibly more detailed national regulations.
Tape or mask off open contacts and pack up the battery
in such a manner that it cannot move around in the
packaging.

8.6 In the event of a thunderstorm

To reduce the risk of damage to electrical components
in the robotic lawnmower and its charging station, we
recommend that all connections to the charging station
are disconnected (power supply, boundary wire and guide
wires) if there is a risk of a thunderstorm.
1. Make sure the wires are marked with the supplied
markers to simplify reconnecting. The charging
station's connections are marked AR, AL, G1.
2. Disconnect all wires.
3. Close the cover to the charging station to protect
the connections from rain.
4. Connect all the wires if there is no longer a risk
of thunder. It is important that each wire is
connected to the right place.
English - 72
OM_1157863-26_HQ 310,315,EN_160229.indd 72
MAINTENANCE
1.
Power
AR
G1
AL
2.
3012-1338
3012-1339
3012-1340
2016-02-29 10:52:38