Husqvarna AUTOMOWER 315 Operator's Manual page 78

Upside down
Needs manual
charging
Next start hh:mm
Empty battery
Lifted
Collision sensor
problem, front/rear
Wheel drive problem,
right/left
Alarm! Mower
switched off
Alarm! Mower stopped
Alarm! Mower lifted
Alarm! Mower tilted
Electronic problem
Loop sensor problem,
front/rear
Charging system
problem
Tilt sensor problem
Temporary problem
Temporary battery
problem
Battery problem
Charging current too
high
English - 76
OM_1157863-26_HQ 310,315,EN_160229.indd 76
TROUBLESHOOTING
The robotic lawnmower is leaning too
much or has turned over.
The robotic lawnmower is set to the
Secondary area operating mode.
The timer setting prevents the robotic
lawnmower from operating.
The robotic lawnmower is currently in
standby.
The clock on the robotic lawnmower
is not correct.
The robotic lawnmower cannot find
the charging station.
The lift sensor has been activated as
the mower has become trapped.
Mower body can not move freely
around its chassis.
Grass or other object is wrapped
around the drive wheel.
The alarm was activated because the
mower was switched OFF.
The alarm was activated because the
mower was stopped.
The alarm was activated because the
mower was lifted.
The alarm was activated because the
mower was tilted.
Temporary electronic or software
related issue in the mower.
Temporary battery related issue in
the mower.
Wrong or faulty power supply unit.
Turn the robotic lawnmower the right way up.
Place the robotic lawnmower in the charging
station. This behaviour is normal and no action is
required.
Change the timer settings. See 6.3 Timer on
page 44.
The robotic lawnmower needs to be in the charging
station for at least 2 hours per day (6 hours for
Automower® 310). This is normal and no action is
required.
Set the time. See Time & date on page 61.
The guide wire is broken or not connected.
The battery is spent.
The charging station's antenna is defective.
Free the mower
Check that the mower body can move freely
around its chassis.
If the problem remains, please contact your dealer
Clean the wheels and around the wheels.
Adjust the mower security level in the Security
menu.
Restart the mower. If the problem remains, please
contact your dealer.
Verify you are using correct power supply unit. If
the problem remains, please contact your dealer.
2016-02-29 10:52:39