Husqvarna AUTOMOWER 315 Operator's Manual page 85

In that case, move the connection for the new wire
closer to the disconnected end (roughly at the
middle of the suspected wire section) and check
again if the indicator lamp is green.
Continue until only a very short section of the wire
remains which is the difference between a flashing
blue light and a solid green light.
b) If the indicator lamp is solid green in test 3b)
above, a similar test is carried out but with the new
loop wire connected to AL instead.
5. When the break is found, the damaged section
must be replaced with a new wire. The damaged
section can be cut out if it is possible to shorten the
boundary wire. Always use original couplers.
OM_1157863-26_HQ 310,315,EN_160229.indd 83
TROUBLESHOOTING
3023-029
3023-030
3012-1323
English - 83
2016-02-29 10:52:43