Adjusting Non-Verifiable Models - KERN FFN-N Operating Instructions Manual

7.1.1 Adjusting non-verifiable models

Display
(Example)
19
Operation
 Start balance by pressing
 Whilst the weighing scale is carrying out a self-test,
(00...- 99...) press
CAL" appears.
 Press
,
in the display appears „UnLod".
 Press
again
the weight value will be displayed.
 Enter value for adjustment weight (See chpt 1) by
 Position weight
 Press
Remove weight whilst scale is carrying out self-test
Weighing scale changes to zero display.
This completes the adjustment process.
and hold until the message "F1
FFN-N-BA-e-1323