Setting The Multi-Tare Function - KERN FFN-N Operating Instructions Manual

9.4

Setting the Multi-Tare function

 Start balance by pressing

 While the balance carries out a self test, press
 Press

 For verifiable devices press the adjustment switch
 Select function using
 Use

 Use

"F8 tn" appears, now the function is enabled
 Press
 Press
Now you have the ability to tare several times in a row.
FFN-N-BA-e-1323
keep pressed until „F1 CAL" appears
repeatedly until „F8 tn" appears
be displayed (PtArE or 0tArE)
to change between the individual parameters
to select „PtAre"
repeatedly until "bACK" appears
The balance carries out a restart and changes to weighing
mode
, the function adjusted as last will
and
28