Non-Verifiable Models - KERN GAB-N Series Operating Instructions Manual

9.2 Non-verifiable models:

 Switch on balance Whilst balance is carrying out self-test
(counts down from 99... to 00...)
same time.
"UnLoad" will be displayed, followed by flashing numeric
value.
 Change by pressing the navigation keys (See manual chap.
8); select desired setting; currently enabled digit will be
flashing.
 Confirm value by
 Place adjustment weight, stability display
 After the adjustment the balance will carry out a self-test.
Remove adjusting weight during self test,
balance will return into weighing mode automatically.
In case of an adjustment error or incorrect adjusting weight
the display will show an error message, repeat adjustment
process.
18
TARE
and
0
, "Load" will be displayed.
UnLQAD
%
press at the
22.000
12.000
appears
GROSS
ZERO
GAB-N-BA-e-1817

(Example)
(Example)
LQAD
0.0