Adjustment Non Verifiable Models - KERN WTB-N Series Operating Instructions Manual

7.1.1

Adjustment non verifiable models

Display

(example)
If the display shows an error message or an incorrect value, repeat adjustment
process. If the error message remains, please contact your dealer.
21
Operation
 Start balance by pressing
 While the balance carries out a self test (00...- 99...), press
and keep pressed until „F1 CAL" appears on the
display.
 Press
;
in the display appears „UnLod". Wait for the triangle above
the stability symbol, then press
used adjustment weight is displayed. Exp: „6 kg". If
necessary, change value by
 Place the adjustment weight
 Wait for the triangle above the stability symbol
 Press
While the balance carries out a self-test, take away the
adjustment weight
The balance changes over to zero display.
Now the process of adjustment is completed.
, the value of the last-
.
WTB-N_WTB-NM-BA-e-1622