Indoor Unit Installation; Installing The Mounting Plate - McQuay M5WMY10KR Installation Manual

01_EN_3P257187-1A.fm Page 5 Thursday, November 12, 2009 12:01 PM

Indoor Unit Installation

1.

Installing the mounting plate

• The mounting plate should be installed on a wall which can support the weight of the indoor unit.
1) Temporarily secure the mounting plate to the wall, make sure that the panel is completely level, and mark the boring
points on the wall.
2) Secure the mounting plate to the wall with screws.
Recommended mounting plate retention spots and dimensions
Recommended mounting plate
retention spots (5 spots in all)
41.3
■English
Place a leveler
on raised tab.
120.5
203
54.5 160 50
Gas pipe end
330.5
770
Keep here the piece cut out
from the unit for piping
* The removed pipe port cover can be
kept in the mounting plate pocket.
Use tape measure
as shown.
Position the end of
a tape measure at
101
247
41.3
160 54
Through-
331
the-wall
hole φ65mm
Liquid pipe end
Drain hose
position
Removed pipe
port cover
A
Mounting plate
.
unit: mm
5