Galaxy A16F-R2422 Installation and Hardware Reference Manual
Step 5. Remove the four (4) retention screws located on the sides of the
Step 6. Remove the hard drive from the drive tray. Disconnect the drive
Step 7. Install the new hard drive. Please refer to the complete hard drive
5-22
Figure 5-32: Removing a Drive Tray
drive tray (two on each side.) (See Figure 5-33)
Figure 5-33: Loosening the Hard Drive Screws
from the MUX kit, and then remove the hard drive. (See Figure 5-
34)
Figure 5-34: Removing the Hard Drive
installation procedures in Section 2.7.3.
Subsystem Maintenance