Table of Contents
Advertisement
5.1 Overview
5.1.1 About Subsystem Maintenance
Constant monitoring and maintenance of your A16F-R2422 minimizes
subsystem downtime and preserves the working integrity of the system for a
longer period of time. If any of the subsystem components fail, they must be
replaced as soon as possible.
Do not remove a failed component from the subsystem until you have a
replacement on hand. If you remove a failed component without
replacing it, the internal airflow will be disrupted and the system will
overheat, causing damage to the subsystem.
All of the following components can be replaced in case of failure:
1. Controller modules – Section 5.2
2. Memory modules – Section 5.3
3. BBUs – Section 5.4
4. Host connection modules – Section 5.5
5. PSUs modules – Section 5.6
6. Cooling modules – Section 5.7
7. Hard drives – Section 5.8
8. Hard drive trays – Section 5.8
9. MUX kit – Section 5.9
Subsystem Maintenance
Subsystem Maintenance
WARNING!
Chapter 5: Subsystem Maintenance
Chapter 5
5-1
Advertisement
Table of Contents
