Table of Contents
Advertisement
Galaxy A16F-R2422 Installation and Hardware Reference Manual
3. Install hard drives: Although hard drives have been preinstalled, a hard
drive may need to be replaced.
procedure.(See Section 2.7)
4. Install drive trays: After the hard drives have been installed into the
drive trays, the drive trays must be installed into the enclosure itself.
(See Section 2.8)
5. Cable connection: Use the power cords that came with the subsystem
to connect the subsystem to the main power source. Use the self-
purchased Fibre cable to connect a host port to the host computer or an
external device.
6. Power up: Once the components have been properly installed and all
cables are properly connected, you can power up the subsystem and
configure the RAID array. (See Section 4.4)
2.4.1 Installation Procedure Flowchart
Figure 2-1 shows a flowchart of the installation procedure. As you complete
each step, check off the "Done" box on the right. Please use this flowchart
in conjunction with the instructions that follow.
2-4
Figure 2-1: Installation Procedure Flowchart
Follow the instructions in this
Hardware Installation
Advertisement
Table of Contents
