Replacing A Failed Hard Drive - Rorke Data Galaxy A16F-R2422 Installation And Hardware Manual

Step 2. Install the new cooling module by aligning the module with the

5.8 Replacing a Failed Hard Drive

5.8.1 Hard Drive Maintenance Overview
•
Hot-swappable drive trays: The drive trays are all hot-swappable. If a
hard drive fails, it can be replaced while the subsystem is still running.
•
Handles: If the failed hard drive is behind either the left or right front
handle, unfold the handles to access the drive trays. (See Figure 5-29)
Subsystem Maintenance
Figure 5-27: Removing the Cooling Module
cooling module slot on the lower section of the PSU module and
gently sliding it in. The latches will hold the module in place. (See
Figure 5-28)
Figure 5-28: Installing the New Cooling Module
Chapter 5: Subsystem Maintenance
5-19