Mechanical Specifications; Dimensions - Pacific Power Source ASX series Operation Manual

SECTION 2 SPECIFICATIONS
2.2

MECHANICAL SPECIFICATIONS

This paragraph describes the mechanical characteristics of the ASX-Series Power Sources.

2.2.1 DIMENSIONS

Dimensions of the ASX-Series Power Sources are listed below.
Height:
Width:
Depth:
Weight:
Refer to Figure 2.2.1 for the outline drawing of the Model 115-ASX.
Height:
Width:
Depth:
Weight:
Refer to Figure 2.2.1 for the outline drawing of the Model 120-ASX.
Power Source:
Height:
Width:
Depth:
Weight:
Refer to Figure 2.2.2 for the outline drawing of the Model 140-ASX.
Magnetics Module: (Houses Output Transformers used with the 140, 345, & 360-ASX power
sources.)
Height:
Width:
Depth:
Weight:
Refer to Figure 2.2.4 for the outline drawing of the Magnetics Module.
MODEL 115-ASX
5.25" [134 mm]; 3 rack unit
19.00" [483 mm] (front panel); 16.75" [426 mm] (chassis)
23.00" [584 mm] (measured from back side of front panel, excludes terminal blocks)
70 lbs. [32 kg] (w/o output transformers);
95 lbs. [43 kg] (with output transformers)
MODEL 120-ASX
5.25" [134 mm]; 3 rack unit
19.00" [483 mm] (front panel); 16.75" [426 mm] (chassis)
23.00" [584 mm] (measured from back side of front panel, excludes terminal blocks)
80 lbs. [36 kg]
MODEL 140-ASX
8.75" [222 mm]; 5 rack unit
19.00" [483 mm] (front panel); 16.75" [426 mm] (chassis)
23.12" [587 mm] (measured from back side of front panel, excludes terminal blocks)
120 lbs. [55 kg]
5.25" [134 mm]; 3 rack unit
19.00" [483 mm] (front panel); 16.75" [426 mm] (chassis)
23.50" [597 mm]
120 lbs. [55 kg]
24