Pacific Power Source ASX series Operation Manual page 13

1.3 GENERAL PRODUCT DESCRIPTION (cont.)
7. Model 345-ASX - 4.5 kVA model, capable of 1, 2, or 3 Phase operation. Single and
three phase modes provide 4.5kVA of power with a 0-135 VAC
2 phase mode provides 3.0kVA of power with a 0-270
Magnetics Module available for higher output voltage ranges.
8. Model 360-ASX – 6.0 kVA model, capable of 1, 2, or 3 Phase operation. Single and
three phase modes provide 6.0kVA of power with a 0-132 VAC
2 phase mode provides 4.0kVA of power with a 0-270
Magnetics Module available for higher output voltage ranges.
9. Model 3120-ASX - 12.0 kVA model, capable of 1, 2, or 3 Phase operation. Single, split,
and three phase modes provide 12kVA of power with a 0-135 VAC
range. 2 phase mode provides the full 12.0kVA of power with a 0-270
External Magnetics Module available for higher output voltage ranges.
10. System Control Unit (SCU) - Self-contained chassis assembly which houses a
UPC-Series controller allowing for the controller to be remotely located from the power
source chassis.
External voltage sense is provided on all systems. Systems configured with the programmable
controller also offer Continuous Self Calibration (CSC) output level control.
Output voltage and current metering is provided on all systems. Specifications of the metering
functions vary by controller type. Refer to Section 8 of the UPC-Series Operation Manual for
details relative to the metering functions.
5
SECTION 1 GENERAL
output voltage range.
l-n
voltage range. External
l1-l2
output voltage range.
l-n
voltage range. External
l1-l2
output voltage
l-n
voltage range.
l1-l2