Service; Service Procedure; Roster Of System Level Factory Part Numbers - Pacific Power Source ASX series Operation Manual

7

SERVICE

This section describes service of the ASX-Series AC Power Source.
7.1

SERVICE PROCEDURE

The ASX-Series Power Source contains no user serviceable parts. Service is accomplished by
returning the unit to the factory or authorized service center. Under some circumstances, the
factory may authorize the user to perform limited sub-assembly or component changes as
deemed allowable by the factory service representative. For this purpose, many sub-assembly
and component level Pacific Power Source Corporation part numbers have been included here.
Part numbers for various components are listed separately for each Model.
When questions regarding operation arise or service is required, call the factory for instructions.
Pacific Power Source Corporation maintains a staff of highly trained technicians who are ready
to assist. The phone number to call is (714)898-2691.
7.2

ROSTER OF SYSTEM LEVEL FACTORY PART NUMBERS

The following is a list of system level factory part numbers for the models which comprise the
ASX-Series line of equipment. Part numbers are stated for reference.
MODEL NAME
MODEL 115-ASX
MODEL 120-ASX
MODEL 140-ASX
MODEL 160-ASX
MODEL 315-ASX
MODEL 320-ASX
MODEL 345-ASX
MODEL 360-ASX
MODEL 3120-ASX
Transformer assembly for the 115-ASX
Magnetics Module for the 140, 345, and 360-ASX
Magnetics Module for the 3120-ASX
System Control Unit (SCU)
UPC 1 Programmable 1φ Controller
UPC 3 Programmable 3φ Controller
SECTION 7
SERVICE
1.5 kVA AC Power Source
2.0 kVA AC Power Source
4.0 kVA AC Power Source
6.0 kVA AC Power Source
1.5 kVA AC Power Source
2.0 kVA AC Power Source
4.5 kVA AC Power Source
6.0 kVA AC Power Source
12.0 kVA AC Power Source
85
PART No.
143139
143148
143013
143014
143145
143149
143016
143017
143008
140140
134350
140640
133000
141102
141302