Wlan Params Submenus - Printronix SL5000 User Manual

WLAN
PARAMS
(from page 264)
WEP Key 4 WEP Key 4
BYTE5: BYTE6:
4
WEP Key 4 WEP Key 4
BYTE11: BYTE12:
WPA WPA
6
Cipher P-Phs (01-15)
3
TKIP* XXX
AES
TKIP+AES

WLAN PARAMS Submenus

Signal Strength
This menu displays the strength of the wireless signal.
NOTE: This is a display value only and cannot be changed.
Operation Mode
Allows you to select the way the Wireless option communicates:
•
Infrastructure (the default). The Wireless option must go through an
Access Point.
•
Pseudo IBSS. Proprietary, peer-to-peer communication (without an
Access Point). The two peers must be specific to one manufacturer.
•
Ad Hoc. Standard, peer-to-peer communication (without an Access
Point). The two peers can be from different manufacturers.
4 4
WEP Key 4 WEP Key 4
BYTE7: BYTE8:
4 4
WEP Key 4 Default WEP
BYTE13:
0*
1-4
WPA P-Phs WPA P-Phs
6 6
(16-30) (31-32)
Notes:
* = Factory Default
3
A 1-32 character, case-sensitive string. Characters can be
alphanumeric, symbols, or spaces.
4
This menu appears only if "WEP Key 1 Width" is set to 128 Bits.
6
This menu appears only if a Symbol LA5127 RF card is installed.
WLAN PARAMS Submenus
4 4
WEP Key 4
BYTE9:
Reset WEP
Key Keys
Reset WPA
6 6
P-Phs
4
WEP Key 4
BYTE10:
WPA
6
Mode
Disable*
Enable
265