Menu Overview - Printronix SL5000 User Manual

Chapter 3

Menu Overview

Menu Overview
QUICK
SETUP CONTROL
Set the basic RFID encoder
menus needed to setup and status
configure the reporting.
printer.
CALIBRATE
CTRL
Select the correct Select the
media sensing desired Active
for the media IGP emulation,
type installed and other emulations,
perform media and various
sensor printer operating
calibration. parameters.
SERIAL
PORT
Select various Selects various
serial port related USB port related
parameters. parameters.
94
RFID VALIDATOR
1
Online data
validator setup
and status
reporting.
PRINTER SELECTED
CONTROL EMULATIONS
Emulations
selected from the
PRINTER
CONTROL menu
appear here.
These
emulations relate
to graphics
languages,
particular
printers, and
optional host
interface
protocols.
USB OPTIONAL
PORT PORTS
Select optional
host interfaces.
Press
Press ↓ or ↑ to move within each main menu.
NOTES:
1
This menu appears only if an RFID encoder is installed.
See the RFID Labeling Reference Manual .
2
This menu appears only if a Validator is installed. See
the Online Data Validator User's Manual .
2
CONFIG.
CONTROL
Name, store, and
retrieve up to
eight custom
printer
configurations.
DIAGNOSTICS
Select various
printer tests,
monitor and
record printer
performance.
OPTIONAL
FEATURES
Select optional
features, such as
Battery Control.
. . to select the next main menu.
.
MEDIA
CONTROL
Control various
parameters
related to print
quality, media,
and ribbon.
PARALLEL
PORT
Select various
parallel port
related
parameters.
PRINTER
MGMT
Select PNE port
type and port
number.