Aastra 6753i User Manual page 41

Activate
Modify
Activating ring alone
You wan to specify which of your phone shall ring when you receive a call.
When your system administrator has set up a phone number with several phones
(One-number user concept, see chapter
define on which phones a call shall acoustically be signalled using ring alone.
When you have activated ring alone on a phone, the acoustic ringing tone is deacti-
vated for all other phones. An incoming call is signalled in the display of all phones.
You can answer the call on each of your phones.
Note:
When you have activated ring alone but deactivated the personal call routing for a
phone in parallel, an incoming call is not acoustically but only visually signalled.
This function must be stored under a function key (see chapter
page 64).
Ring alone
Activating/deactivating calling line identification restriction (CLIR)
You do not want your call number to appear on the terminal display of a called party
in the public network.
Available options:
Menu
Permanent
Per call
Aastra 6730i/6731i/6753i
eud-1614/1.0 – R3.0 – 09.2013
Activating/deactivating personal call routing
Select the call routing you want and confirm with the
➔
The selected routing is activated and another is deactivated.
Renaming personal call routing:
1. Select the call routing you want and press the
2. Enter the name and confirm with the
"Purpose and
Activating/deactivating ring alone
Press the function key for
➔
Function is activated/deactivated and the LED on the function key is
switched on/off.
Description
The call number is never displayed.
Call number should only be restricted for certain calls. This function must be
activated before dialling the call number.
Modify
Execute softkey.
function", page 66), you can
Ring alone.
Making a call
Activate softkey.
softkey.
"Configuring keys",
41