Aastra 6753i User Manual page 47

Function
Call forw. if busy (CFB) to VM
on/off
Call forw. on no reply (CFNR)
to pager on/off
Call forw. on no reply (CFNR)
to user on/off
Call forw. on no reply (CFNR)
to VM on/off
Call forwarding menu
Call forwarding protection
on/off
Calling line ident. restriction
(CLIR) on/off
Calling line ident. restriction
(CLIR) per call
Call list menu
Control output on/off
Do not disturb (busy) on/off
Do not disturb (forwarding)
on/off
Empty
Free configurable
Free seating (log in/log out)
Home Alone on/off
Local phone book
Missed calls
Aastra 6730i/6731i/6753i
eud-1614/1.0 – R3.0 – 09.2013
Description
Incoming calls are directly forwarded to a different destination (voice mail) if
you are busy.
Incoming calls are automatically forwarded to another destination (pager).
Incoming calls are automatically forwarded to another destination (user).
Incoming calls are automatically forwarded to another destination (voice
mail).
Direct access to the Forward
page 35).
CFU to your phone is not possible.
This function lets you prevent your call number from being displayed to the
caller (see chapter "Activating/deactivating calling line identification restric-
tion (CLIR)", page 41).
This function lets you prevent your call number from being displayed to the
caller (see chapter "Activating/deactivating calling line identification restric-
tion (CLIR)", page 41).
Direct access to the Call list
You can control external electric equipment or installations using control
outputs. For example you can use your phone to open and close electric
gates or to switch the lights on or off throughout a building.
Phone will not ring. Incoming calls are automatically forwarded to a specific
destination.
Phone will not ring. Incoming calls are automatically forwarded to a specific
destination.
The key assignment is configured with an empty function. The subsequent
softkeys do not move.
You can use function commands to define a function to suit your personal
requirements. A function can consist of one or more function commands,
function codes, and the phone number. You can either carry out a function
directly or store it under a key.
Logs in/out on a free seating phone (see chapter
If calls to a user group can only be answered by one user, the user in question
can activate Home Alone on the user group. Then if the user is already in a
call, all subsequent internal or external calls to the user group obtain a busy
tone.
Access to the local phone book. Contacts in the local phone book are stored
on the phone only (see chapter
Call list for unanswered calls.
system menu (see chapter
system menu.
"Free
"Phone book management", page 59).
Making a call
"Call forwarding",
seating", page 44).
47