Functions With Opencount - Aastra 6753i User Manual

Function
Take (pick up own call)
Transparent data
Trigger Redkey
User group (log in/log out)
User group all (log in/log out)
Voice mail greeting on/off
Voice mail menu
Welcome announcement
on/off

Functions with OpenCount

OpenCount is a software package used for the call logging management on the
communication system. The application can be integrated into your Aastra 400
communication system and enables the logging, the administration, and the
analysis of all call and connection data.
If an OpenCount is integrated in your Aastra 400 communication system, the fol-
lowing additional features are also available on your phone.
PIN telephony
The PIN telephony is part of OpenCount. The possible applications of the PIN teleph-
ony depend on the area of use, for example in the area of health care and accommo-
dation/hotel:
• Independently from the phone you can make external calls for a fee. The credit may
be limited.
• You can charge the charges and the call information of your outgoing and incom-
ing calls to specific projects.
Aastra 6730i/6731i/6753i
eud-1614/1.0 – R3.0 – 09.2013
Description
With this function, you can transfer an active call connection from one
phone to another within the one number user concept (see chapter
(pick up own call)", page 39).
This function takes charge of the transparent exchange of data between the
communication server and external applications.
Triggers the stored redkey function.
In the user group incoming and internal calls are routed to a group of inter-
nal destinations according to a preconfigured call distribution.
In the user group incoming and internal calls are routed to a group of inter-
nal destinations according to a preconfigured call distribution. With this
function, you can log in or out from all user groups at the same time.
Activates/deactivates a selected voice mail greeting.
Direct access to the Voice mail
Announcement service for incoming internal and external calls. If you do not
answer an external call after a set delay, the user who is calling will obtain an
announcement. After the announcement the caller will then hear the ring-
back tone again.
system menu.
Making a call
"Take
49