Klauke EKP 1 Instruction Manual page 32

Instruction manual EKP 1
_______________________________________________________________________________________________________________________
Attention
Electric-hydraulic crimping tools should not be operated in pouring rain or under
water.
5.3. Mounting instructions
If other applications which exceeds those mentioned in table 2 must be performed with this tool
it is necessary to contact the manufacturer. Please read the assembly instructions in Chapter 12
of our general catalogue.
5.4. Service and maintenance instruction
The hydraulic crimping tool has to be cleaned and dried after use. The tool is basically
maintenance-free, only the locking pins (Pos.-No. 7) of the bottom part of the crimping head
(Pos.-No. 3) have to be oiled regularly.
We recommend to return the tool annually or after 10.000 crimping cycles to one of our
authorized Service Centers (ASC). Within the intended use only the tool heads (Pos.-No. 4)
and the battery (Pos.-No. 5) are permitted to be changed by the user.
Attention
Do not damage the seals of the tool.
If the seals are damaged the warranty is invalidated.
Instruction manual EKP 1
__________________________________________________________________________________________________________________
Attention
Electric-hydraulic crimping tools should not be operated in pouring rain or under
water.
5.3. Mounting instructions
If other applications which exceeds those mentioned in table 2 must be performed with this tool
it is necessary to contact the manufacturer. Please read the assembly instructions in Chapter 12
of our general catalogue.
5.4. Service and maintenance instruction
The hydraulic crimping tool has to be cleaned and dried after use. The tool is basically
maintenance-free, only the locking pins (Pos.-No. 7) of the bottom part of the crimping head
(Pos.-No. 3) have to be oiled regularly.
We recommend to return the tool annually or after 10.000 crimping cycles to one of our
authorized Service Centers (ASC). Within the intended use only the tool heads (Pos.-No. 4)
and the battery (Pos.-No. 5) are permitted to be changed by the user.
Attention
Do not damage the seals of the tool.
If the seals are damaged the warranty is invalidated.
page 32
page 32