1. Introduction connecting material in the crimping head. - The EK 60 VP INS is equipped with a microprocessor which indicated Before starting to use the tool please read the service intervals, internal checks and low battery charges. It also shuts instruction manual carefully.
Page 4
Instruction Manual EK 60 VP INS page 4 ______________________________________________________________________________________________________________________ 5. Remarks in respect of the determined use The tool is not designed for continued crimping operations. After a sequence of approximately 30-40 completed crimps you have to make a Before starting any work on electrical appliances it must be break of 15 min.
Instruction Manual EK 60 VP INS page 5 ______________________________________________________________________________________________________________________ If charging a battery which has currently been used or which was 8. Technical Data laying in the sun for a longer period of time the LED might flash red. In this case wait for a while. The charging procedure starts Weight of the complete tool: approx.
Page 6
Auf dem Knapp 46 D-42855 Remscheid _____________________________________________________________________________ Handgeführtes Elektrowerkzeug Typ EK 60 VP INS (D) CE `03 - Konformitätserklärung. Wir erklären in alleiniger Verantwortlichkeit, daß dieses Produkt mit den folgenden Normen oder normativen Dokumenten übereinstimmt: DIN EN 292 Teil 1 und 2, EN 294, EN 349, EN 60204-1, EN 28662-1, EN 50081-1, EN 50082-2, EN 60529 gemäß...