Table of Contents
Advertisement
Available languages
Available languages
Instruction manual EKP 1
_______________________________________________________________________________________________________________________
Attention
Do only crimp connecting the tool head is designed for and which is mentioned in
table 2.
If different connecting respectively conducting materials have to be crimped, please contact the
manufacturer.
Attention
Do not crimp on live cables or conductors
Before starting to crimp please make sure that all parts involved in the crimping process are not
connected to live circuits.
The tools are hand held tools and they are not supposed to be restrained in a vise. It is not
allowed to use the tools in a stationary application. The tool is not designed for continued
crimping operations. After a sequence of approximately 100 completed crimps you have to
make a break of 15 min. to give the tool time to cool down.
Attention
Too intensive use can cause heat damages for the tool
Attention
During the operation of electric engines sparks can occur which might ignite highly
inflammable or explosive liquids and materials
Instruction manual EKP 1
__________________________________________________________________________________________________________________
Attention
Do only crimp connecting the tool head is designed for and which is mentioned in
table 2.
If different connecting respectively conducting materials have to be crimped, please contact the
manufacturer.
Attention
Do not crimp on live cables or conductors
Before starting to crimp please make sure that all parts involved in the crimping process are not
connected to live circuits.
The tools are hand held tools and they are not supposed to be restrained in a vise. It is not
allowed to use the tools in a stationary application. The tool is not designed for continued
crimping operations. After a sequence of approximately 100 completed crimps you have to
make a break of 15 min. to give the tool time to cool down.
Attention
Too intensive use can cause heat damages for the tool
Attention
During the operation of electric engines sparks can occur which might ignite highly
inflammable or explosive liquids and materials
page 31
page 31
Advertisement
Table of Contents
