Toggle Heating/Cooling - MDT SCN-RT1GW.01 Technical Manual

Technical Manual Glass Room Temp. Contr. SCN-RT1Gx.01

8.2.4 Toggle Heating/Cooling

The following parameter shows the setting toggle heating/cooling:
Figure 45: Toggle heating/cooling
The fu tio „Toggle heati g/ ooli g s it hes et ee heati g a d ooli g. The fu tio
a normal switching function, but its representation in the display is optimized for heating/cooling
switchover.
The following table shows the communication objects for this function:
Number Name
61 Toggle Heating/Cooling
62 Value for toggle
Table 76: Communication object - Toggle heating/cooling
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
89
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
Length Usage
1 Bit Switching between heating and cooling
1 Bit Status object, should be connected with the
state of the controller
o ks like