Ventilation Control - MDT SCN-RT1GW.01 Technical Manual

32 Manual setpoint value
offset
Table 2: Overview communication objects - Room Temperature Controller

3.1.3 Ventilation Control

Objects for Ventilation Control:
38 Ventilation Control
39 Ventilation Control
39 Ventilation Control
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
15
Technical Manual Glass Room Temp. Contr. SCN-RT1Gx.01
Increase/Reduction
DPT 1.001
(1 = + adjusted step,
0 = - adjusted step)
Block DPT 1.003
Level 1 DPT 1.001
Bit 0 DPT 1.002
receive Controller receives
setpoint value
offset via a 1 Bit
object
receive Controller locks
ventilation control
send Controller
switches level 1
send Controller
switches Bit 0
Visu, Operating Object is shown when
pa a ete "etpoi t alue
keys, Control unit,
offset ia is set to Bit o je t
Display,
Diag osti , ...
and shifts the set value
depending on the current
setpoint. The amount of
displacement can be set in the
parameters.
Visu, Operating Object is only shown when the
keys, Control unit, locking function was activated
Displa , ...
in the settings
Actuator for Object is shown at the setting
controlling a step switch bit coded
ventilation
system, Fan-Coil
actuator
Actuator for Object is shown at the setting
controlling a step switch binary coded
ventilation
system, Fan-Coil
actuator