MDT SCN-RT1GW.01 Technical Manual page 13

14 Heating disable object
15 Cooling disable object
17 Heating request
18 Cooling request
19 Heating/Cooling
switchover
20 Outside temperature
21 Max memory value
22 Min memory value
23 Min/Max Memory Reset
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
13
Technical Manual Glass Room Temp. Contr. SCN-RT1Gx.01
Disable heating
DPT 1.003
Disable cooling
DPT 1.003
Send request
DPT 1.001
Send request
DPT 1.001
0 = heating, 1 = cooling
DPT 1.001
Read external sensor
DPT 9.001
Read memory
DPT 9.001
Read memory
DPT 9.001
Reset memory DPT 1.001
recieve Controller
diasables heating
recieve Controller
diasables cooling
send Controller sends
heating request
send Controller sends
cooling request
receive Controller
switches between
heating and
cooling
receive Controller receives
temperature from
outside sensor
send Controller sends
max. temperature
send Controller sends
min. temperature
receive Controller resets
min/max values
Visu, Opereating Can be activated in the settings
keys, Control unit when the controller is set to
heating.
Visu, Opereating Can be activated in the settings
keys, Control unit when the controller is set to
cooling.
Actuator for Can be activated in the settings
switching the when the controller is set to
heati g pu p...
heating.
Actuator for Can be activated in the settings
switching the when the controller is set to
ooli g pu p...
cooling.
Visu, Opereating Can be activated in the
keys, Control unit parameter when the controller
is set to heating and cooling.
Outdoor Object is shown when the
temperature guiding is activated in the
sensor parameter
Visu, Display, Object is shown when the
Diagnostic... min/max values are activated
Visu, Display, Object is shown when the
Diag osti ...
min/max values are activated
Visu, Opereating Object is shown when the
keys, Control unit min/max values are activated