Alarm/Messages - MDT SCN-RT1GW.01 Technical Manual

Technical Manual Glass Room Temp. Contr. SCN-RT1Gx.01

6.2 Alarm/Messages

The follo i g figu e sho s the e u Ala
Figure 7: Alarm/Messages
The settings for the LCD-Alarm messages are descripted in the menu 5.2 LCD-Alarm messages.
The table shows the available settings for this menu:
ETS-text
Alarm
Frostalarm if value <
Heatalarm if value >
Messages
Message if value >
Message if value <
Table 18: Parameter Alarm/Messages
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
36
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
/Messages :
Dynamic range
[default value]
 not active
 active
3°C-10°C
[7°C]
25°C-40°C
[35°C]
 not active
 active
18°C-40°C
[26°C]
1°C-25°C
[13°C]
comment
Activation of the alarm function
Dynamic range of the frostalarm
Adjustment possible if alarm is activated
Dynamic range of the heatalarm
Adjustment possible if alarm is activated
Activation of the message function
Dynamic range of the upper message
Adjustment possible if messages are
activated
Dynamic range of the lower message
Adjustment possible if messages are
activated