Backlight - Wirepath Surveillance WPS-550-DOM-A-WH Installation Manual

AWCSET Setting
This function is ideal for an environment
with the predominance of a single color.
For example, when used in a casino and
the camera is pointed to a green table,
the color would be inaccurate and the
overall tone of the picture would be too
red. This mode compensates the white
balance and offers a more accurate color.
• To set the white balance for the environment, select AWCSET and
point the camera towards the scene. Press and hold the MENU
button for 3 seconds. The camera will automatically set the white
balance value based on the scene.
Manual Setting
• Select the color temperature INDOOR
or OUTDOOR based on the environment
and adjust the value of BLUE and RED to
a user-preferred white balance image.

BACKLIGHT

BLC (Back light compensation) Setting
This function corrects the exposure of
subjects or objects in front of a bright
light source. Choose ON to activate
the BLC function or enter into subdirectory
for more settings.
• AREA SEL: Select AREA1 or AREA2 to
adjust values for the corresponding area.
• AREA STATE: Set to OFF to deactivate
the BLC function. Set to ON to activate
the BLC function.
• GAIN: adjust the level of BLC from 0~255
• Customize the size of BLC area by
adjusting HEIGHT, WIDTH, LEFT/RIGHT,
TOP/BOTTOM values.
© 2013 Wirepath Surveillance
WPS-550-DOM-A Installation Manual
SETUP
LENS
EXPOSURE
WHITE BAL.
BACKLIGHT
DAY&NIGHT
DPC
SPECIAL
RESET
EXIT
WB MANUAL
COLOR TEMP
BLUE
RED
RETURN
SETUP
LENS
EXPOSURE
WHITE BAL.
BACKLIGHT
DAY&NIGHT
DPC
SPECIAL
RESET
EXIT
BLC
AREA SEL.
AREA STATE
GAIN
HEIGHT
WIDTH
LEFT/RIGHT
TOP/BOTTOM
RETURN
MANUAL
AWCSET
OFF
AUTO
WHITE BAL
-----
-----
RET
MANUAL
AWCSET
OFF
AUTO
AREA1
ON
-----|--------106
---------|----010
---|----------003
------|-------006
-----|--------005
RET
17