Enter Setup
Access the Scanner with Your Program
Use CreateFile to access the scanner as a HID device and then use ReadFile to deliver the scanned data
to the application program. Use WriteFile to send data to the scanner.
For detailed information about USB and HID interfaces, go to www.USB.org.
Acquire Scanned Data
After scanning and decoding a barcode, the scanner sends the following input report:
Byte
7
0
1
2-57
58-60
61-62
63
-
Send Data to the Scanner
This output report is used to send data to the device. All programming commands can be used.
Byte
7
0
1
2-63
** Exit Setup
6
5
Report ID = 0x02
Length of the barcode
Decoded data (1-56)
-
-
6
5
Report ID = 0x04
Length of the output data
Output data (1-62)
Bit
4
3
AIM ID
Reserved
-
-
Bit
4
3
2
1
Decoded
Data
-
-
Continued
2
1
0
0
28