Hyundai WS 2266 Instruction Manual page 35

6.3 Barometric Trend Pointer
The trend pointer displayed on the LCD (A8) indicates the trend of the Barometric pressure.
Indicating the barometric
pressure trend is rising
7. THERMOMETER
7.1 RF Transmission Procedure:
• The main unit automatically starts receiving transmission from outdoor thermo sensor for
outdoor temperature after weather condition setting.
• The thermo sensor unit will automatically transmit temperature signal to the main unit after
batteries inserted.
• For having more than one external transmitter (Maximum3), select the Channel, CH1, CH2 or
CH3 to ensure each sensor is transmitting difference channel before inserting batteries. The
channel select switch (D5) is at the back of the thermo sensor.
• If main unit failed to receive transmission from outdoor thermo sensor in first 3 minutes after
the batteries inserted ("- - . –"display on the LCD), hold "Channel" button (B7) for 3 seconds to
receive transmission manually. RF icon "
Note: Buttons (except "Channel"&"Light" buttons) will not function while scanning for thermo
sensor's signal unless they are well received or stopped manually.
7.2 Temperature& Humidity
(1) Outdoor Temperature --- Channel Selection
• Press "CHANNEL" button (B7) to view the 3 Channel's temperature. The sequence is shown
as follow:
PRESS „CHANNEL" button  PRESS „CHANNEL" button  PRESS „CHANNEL" button
1
CH
• When viewing the record on CHANNEL 1 or 2, or 3, hold "CHANNEL" button (B7) for 3 seconds
to cancel the record on this channel manually, and receive the transmission from channels
automatically again.
Indicating the barometric
pressure trend is steady
" flashes on the LCD.
2
CH
EN - 35
Indicating the barometric
pressure trend is falling
3
CH
display the three
channels alternatively
EN