Technical Data And Specifications; Identification; Technical Data; Adjustments - GGP WBE 0701 Workshop Manual

3.1. Identification

Every motor is marked with a serial number on the
base and applied on the canopy; this serial number
is composed with 9 numeric characters and can
identify:
• - • • • - • • • • •
Year of
manufacture
Date
The serial number must be reported on every ope-
rating sheet in the warranty application and is fun-
damental for identifying and ordering spare parts.
.2.

Technical data

Displacement
Bore
Stroke
Minimum speed (SLOW)
Maximum speed (FAST)
Fuel tank capacity
Oil sump capacity
Dry weight
..

Adjustments

Distance between spark plug
electrodes
Coil air gap
Inlet valve clearance
Exhaust valve clearance
Release 00 - 02/2008

. TECHNICAL DATA AND SPECIFICATIONS

Daily progressive
number
WBE 0701 WBE 0704
160 cc 200 cc
65 mm 70 mm
48 mm 51 mm
1800 (±150) r.p.m.
2900 (±100) r.p.m.
1,0 litres
0,55 litres
11,75 kg 12,80 kg
0,6 - 0,8 mm
0,25 - 0,40 mm
0,10 - 0,15 mm
0,15 - 0,20 mm
Engine WBE 0701-WBE 0704
.4.

Expendable materials

Petrol
- from 5 to 35 °C
Engine oil
- from -15 to +5 °C
- from -25 to + 35°C
Spark plug
Starter rope
.5.

Use limits

The following table gives the use limits of certain
components subject to wear, after which the com-
ponent must be replaced.
Compression when new 8,0:1 (01)/8,0:1
Minimum inlet valve stem diameter
Minimum exhaust valve stem diameter
Minimum inlet valve head rim thickness
Minimum exhaust valve head rim thi-
ckness
Valve seat depth
Minimum valve spring length
Maximum gap between ends of cylin-
der rings
Max. axial gap for compression rings
Minimum gudgeon pin diameter
Max. gudgeon pin-piston seat diame-
ter
Max. connec-
ting rod diame-
ter
pag. 9
<< BACK >>
back to the index
Unleaded (green)
minimum 90N.O.
SAE 30
5W30-10W30
Synthetic 5W30-10W30
RC12YC (Champion)
or equivalent
ø 3,5x2500 mm
Min. 4 bar
5,32 mm
5,27 mm
28,5 mm
0,15 mm
12,95 mm
13,05 mm
gudgeon pin side 13,07 mm
crank side 26,07 mm
Service manual
0,5 mm
0,5 mm
1,8 mm
1 mm