8
8
9
Release 00 - 02/2008
5. TANK AND SUPPLY
5 - Empty the tank and dispose of the petrol used
for cleaning in accordance with the laws in force.
6 - Refit the tank
and the nut (4) to the torques indicated.
5..
1 - Remove the cap (8) and pull out the gasket (9)
and the sponge (10).
2 - Check that:
- the gasket (9) is intact and without cracks or
fissures;
11
- the air passages (11) inside the cap are not clog-
ged;
10
- the sponge (10) is not crushed or broken.
Tightening torques
4
pag. 17
Engine WBE 0701-WBE 0704
[
5.1]
tightening the screws ()
WARNING: Before refilling the tank with new
fuel, check that the petrol pipe is intact.
Checking and cleaning the breather pipe
NOTE: Always replace the entire cap if the
gasket or sponge is damaged.
Tank fixing screws
Tank fixing nut
<< BACK >>
back to the index
8-10 Nm
8-10 Nm
Service manual