Engine Wbe 0701-Wbe - GGP WBE 0701 Workshop Manual

14. ENGINE BLOCK - Overhauling internal parts
41
5
26
24
22
Release 00 - 02/2008
41
42
2

Engine WBE 0701-WBE 0704

20 - Put the piston into the ring compression tool
(41).
21 - Oil the inside of the piston liberally and insert the
piston, with the marking facing the exhaust.
22 - Mount the engine shaft (5) and the connecting
rod cap (24) with the relative screws (26), taking
care with the position references (42) so as to avoid
inverting the mounting direction of the cap.
Close the screws (26) to the indicated couple.
23 - After having fixed the connecting rod cap, take
the greatest care to ensure that the two position
references (22) and (2) punched on the engine
shaft and camshaft gears, coincide, ensuring the
correct distribution phasing.
pag. 51
<< BACK >>
back to the index
Service manual