Replacing The System For Turning Off And Stopping The Engine - GGP WBE 0701 Workshop Manual

11. TURNING OFF AND STOPPING THE ENGINE
8
11
1
Release 00 - 02/2008
6
12
11
pag. 
Engine WBE 0701-WBE 0704
11.4. Replacing the system for turning off and stop-
ping the engine
1 - Remove the starter assembly
2 - Remove the filter assembly
3 - Disconnect the brake wire (2) from the lever
().
4 - Disconnect the faston (6) from the microswitch
(8).
5 - Undo the two screws (11) and the stud (12) which
secure the support bracket (1).
6 - When fitting, perform the above operations in
reverse, tightening the screws (11) and the stud (12)
to the torque indicated.
7 - Refit the starter assembly
[ 7.1].
assembly
8 - Start the engine, release the lawnmower lever
and check that the engine stops within 3 secon-
ds.
WARNING! Never return the lawnmower to
your client without checking brake efficien-
cy.
Tightening torques
11
Brake support screws
12
Brake support stud
Special equipment
7
Universal tester
<< BACK >>
back to the index
[ 6.1].
[ 7.1].
[ 6.1]
and the filter
8-10 Nm
8-10 Nm
Service manual