Dismantling And Cleaning The Cylinder Head; Engine Wbe 0701-Wbe - GGP WBE 0701 Workshop Manual

1
1
16
Release 00 - 02/2008
1. ENGINE BLOCK - External operations
1
14
1
14
15

Engine WBE 0701-WBE 0704

1.. Dismantling and cleaning the cylinder head

1 - Remove the carburettor
2 - Remove the exhaust muffler
3 - Remove the cover and demount the spark plug
[ 1.1].
4 - Remove the starter assembly
5 - Remove lid (5) which is secured with four screws
(6) and remove the washer (7).
6 - Unscrew the screws (1) and remove the cylinder
head (14).
7 - Remove the gasket (15).
8 - Clean the cylinder head (14) and cylinder sur-
faces (16).
9 - Carefully clean the inside of the combustion
chamber and remove possible deposits from the
valve seats.
10 - Turn the flywheel by hand to move the piston
and check the internal surface of the cylinder
(16).
11 - When mounting:
- the gasket (15) must always be replaced;
- Remount the cylinder head (14) screwing the four
screws (1) without fully tightening, then tighten
them to the given torque values, using a cross-over
sequence.
Take care that the pushrods are positioned cor-
rectly in their housings.
12 - Remount the items removed in the reverse order
used in dismantling.
pag. 7
<< BACK >>
back to the index
[ 8.2].
[ 12.1].
[ 6.1].
Service manual