Engine Block - Overhauling Internal Parts; Removing The Engine From The Lawnmower - GGP WBE 0701 Workshop Manual

14. ENGINE BLOCK - Overhauling internal parts



Release 00 - 02/2008
All the operations described below require the re-
2
moval of the engine from the lawnmower.

14.1. Removing the engine from the lawnmower

1 - Empty the tank of fuel
1
2 - Drain the oil in the sump by removing the filler
plug and turning the mower on its side.
3 - Disconnect the throttle cable (1) and the engine
brake cable (2).

4 - Remove the blade assembly and undo the four
screws () which are accessible from the bottom
of the lawnmower.
secure grip, taking account of the overall weight
given in the relevant table

pag. 4
Engine WBE 0701-WBE 0704
[
Grasp the engine at points which offer a
[
<< BACK >>
back to the index
5.1].
.2].
Service manual