General information
The exhaust system consists of a muffler installed on the cylinder together with a gasket, a spacer and a
heatproof baffle.
To solve problems in the exhaust system, see the relevant chapter
1
2
1
Service manual
12. EXHAUST SYSTEM
12.1. Removing and replacing the muffler
1 - Remove the two nuts (1) that fix the guard (2)
and the muffler.
2 - Take out the muffler () and the heatproof baffle
(4).
3 - On assembly::
-
thoroughly clean the cylinder contact surface,
removing all deposits or fragments on the hea-
tproof baffle;
-
always replace damaged mufflers;
4
-
always replace the heatproof baffle (4) if it is
broken or cracked;
-
tighten the two nuts (1) to the specified levels.
Tightening torques
1
Muffler nuts
pag. 4
Engine WBE 0701-WBE 0704
[
15].
Release 00 - 02/2008
<< BACK >>
back to the index
8-10 Nm