Connecting Rs232 Cables - Planar m52L Installation Manual

Connecting RS232 Cables

Connecting RS232 Cables
1
2
For more information about configuring RS232 communications, see "Serial Port
Settings and Diagnostics" on page 79.
RS232 port
connection is on the
control board.
24
Connect the 9-pin adapter to the serial output connector of the controlling
computer. (This computer does not have to be the same one as the computer
used as a picture source.) The serial output is sometimes called the Comm Port,
and sometimes there is more than one.
Connect a cable from the RJ45 adapter to the nearest display's RS232 In
connector.
m52L Installation Guide