Planar m52L Installation Manual page 52

Scale Mode Settings
2
Note:
it in the other. For example, if you try to display a UXGA (1600 x 1200) on an m52L (1920 x
1080) at Fill All, the display will letterbox the image and the following note will appear at the
bottom of the menu: "Can't display - Change Scale Mode. " You can leave the scale mode at
Fill All or change it to Letterbox. You can also select Crop or One to One.
Note:
the picture based on the
Affect on Input Type on 4 x 3 Display
Scale
4 x 3 source
Mode
(e.g. Standard Video
or VGA/SVGA/XGA)
Fill All No distortion
Fill All
makes the picture fit top-to-bottom and left-to-right, regardless of how this stretches or compresses the picture.
Fill All distorts the picture, when the aspect ratio of the incoming picture is not the same as the display.
Crop No distortion
Crop
expands non-native aspect ratio pictures until the second edges touch the border and lets the other edges of the
picture fall outside the display and get cropped.
42
With highlighted, press
SCALE MODE
F il l A ll
C ro p
L et t er b o x/ P il la r bo x
Wi de sc ree n (1 6x 9)
N o r ma l Vid eo ( 4x 3)
O n e t o O ne
The scale modes are "radio" buttons; you can only choose one at a time.
The display is not capable of compressing the image in one direction while stretching
The menu icons change to indicate the effect each mode will have on
SCALE MODE
JUSTIFY
16 x 9 source
(e.g. 1080i or WXGA
computer source)
Compresses width to fit
Crops width of image;
fits height of image
without distortion
m52L Installation Guide
. The
ENTER
and settings, and the source resolution.
SCALE MODE
Affect on Input Type on 16 x 9 Display
4 x 3 source
(e.g. Standard Video or
VGA/SVGA/XGA)
Stretches width of image
Crops top and bottom of
image; fits width of image
without distortion
submenu displays.
SCALE MODE
16 x 9 source
(e.g. 1080i or WXGA
computer source)
Displays full image
without distortion
Displays full image
without distortion