RS232 Communication
RS232 control is not necessary for operation, but is a convenient way to control
Planar® QE Series displays from a computer at a distance. Most things you can do
with the remote, you can do with RS232 commands. Plus, you can send inquiries to
the displays and find out the current settings and values. RS232 connections are
made with standard straight-through cables.
Note:
Applicable Models
This RS-232 user manual applies to all Planar QE Series models. RS232 user manuals
for other products can be found at www.planar.com/support/.
RS232 Setup
The RS232 connection must use the following settings:
Connecting the RS232 Cable
The RS232 cable will connect to a PC or control system, depending on your setup.
Serial communication can occur over RS232, USB-B or LAN.
• 19200 baud rate
• 8 data bits
• 1 stop bit
• No parity bit
• No HW (RTS/CTS) or SW (XON/XOFF) flow control
Planar QE Series RS232 User Manual
5