Rs232 Communication; Connecting The Rs232 Cable; Setting Up Multiple Inputs Using Rs232 Commands - Planar ultrares User Manual

RS232 Communication

RS232 control is not necessary for operation, but is a convenient way to control
displays from a computer at a distance. If your installation will not use RS232 control,
you can skip this section. Most things you can do with the remote, you can do with
RS232 commands. Plus, you can send inquiries to the displays and find out the
current settings and values. RS232 connections are made with standard straight-
through cables.

Connecting the RS232 Cable

The RS232 cable will connect to a PC or control system, depending on your setup.

Setting Up Multiple Inputs Using RS232 Commands

You can also set up multiple inputs using RS232 commands. As is typical with using
RS232 commands, you can pull up a basic program such as Tera Term to send
commands. Below is a short example.
Planar UltraRes User Manual
RS232 Communication
100