Installing The Video Input Module (Vim) - Planar m52L Installation Manual

Installing the Video Input Module (VIM)

If you receive the optional Video Input Module (VIM) separately, use the following
instructions to install it.
Your VIM shipment should include the following items:
1
2
WARNING!
electronic part.
3
4
WARNING!
ponents in the VIM board.
5
6
7
• VIM board
• New VIM cover
• Mounting screws
• Washers/nuts
• Ground strap
Attach the ground strap to your wrist and the chassis.
Turn off the AC power and unplug all cables.
Always turn off power and remove the power cord when adding or removing an
Remove the screws that secure the old VIM cover. Place the screws aside.
Remove the old VIM cover.
Failure to properly use a grounding strap can destroy sensitive electronic com-
Remove the VIM board from its shipping pouch and anti-static bag.
Install the VIM board in its place, pressing the VIM board connector into the
control board connector; it is a snug fit.
Install the four screws that secure the VIM board.
m52L Installation Guide
Installing the Video Input Module (VIM)
Power switch
Power cord
13