Checking Unit Status; Internal Temperature - Planar m52L Installation Manual

Checking Unit Status

If your screen shows black or a test pattern
Do This
4 Ensure the power cable is
connected, the power
switch is ON and the front
LED is illuminated.
m52L doesn't respond to remote control
Possible Cause
Power is not on
Remote batteries are dead or improperly
installed
Remote was not aimed at the IR receiver
Something is blocking the IR receiver
Your installer or service provider has disabled
the remote control
Checking Unit Status
Press
Un i t Stat us
m 52L
01 0- 07 81
M o d e I D: 123
In t ern al Te mp e rat u re: 3 2ºC

Internal Temperature

Indicates the current internal temperature at one point inside the unit. This is not the
highest or the lowest temperature of the unit, nor an indicator of ambient
temperatures.
94
on the remote.
MONITOR
19 20 x 10 80
Re v 00
H Per : 31 78
C u rtai n o r Tes t Pa tt er n is d isp l aye d
m52L Installation Guide
Result Explanation / Further Action
Reconnect cable or turn on unit.
Possible Resolution
Confirm that the power cable is connected and
the power switch is on and the front LED is
illuminated.
Replace or reinstall batteries.
The IR receiver is in the lower right corner (in
landscape mode; in portrait mode, it is in the
lower left corner) of the screen bezel behind a
small hole.
Remove the obstruction.
Contact your installer or service provider.
V Li ne s: 5 25