Adjusting Frequency Manually; Adjusting Phase Manually - Planar m52L Installation Manual

Adjusting Frequency Manually

Adjusting Frequency Manually
1
2
3
Don't worry about the number that appears in the menu. Look at the screen. As the
Frequency is moved away from the ideal setting, more and more vertical bands will
appear in the picture. Adjust Frequency so there are no vertical bands.
Note:
are, you will not be able to get rid of all the vertical bands.

Adjusting Phase Manually

1
2
40
Press / on the remote. This opens the
FREQ PHASE
source is .
ANALOG
Display a checkerboard pattern from the computer.
Select in the menu and use the + or - keys to change the Frequency.
FREQUENCY
Be sure there are no zoom adjustments in effect when adjusting Frequency. If there
With the checkerboard pattern still on the screen, select
Adjust the Phase with the + or - keys on the remote. As the Phase changes, at
some points you will notice more horizontal streaking. Find a point that has no
streaking or minimal streaking. There is usually a fairly broad range of no
streaking, so settle for the point in the middle of this range.
m52L Installation Guide
menu. Confirm that the
PICTURE
in the menu.
PHASE